Hello, our SM 102 6 P, when cleaning the chrome and meter rollers they only spin a little bit then stop. All units do the same thing. There's...
HELLO, Heidelberg installed a new Blt 5 module, it's working now. Thankyou.
Hello, Chock Heidelberg installed new Blt 5 unit. The press is running now, no codes. Thankyou for your expert knowledge.
Hello,Chock. We had the BLT board resoldered, the press ran for 20 seconds then shut off, same codes . A new board is coming from Heidelberg. To...
Hello, again the only thing I haven't done is to take the brake out and inspect it internally. I am positive the encoder is working properly. I've...
So on Monday, the Press would not start at all, many restarts, nothing. Let the Press sit off I came back 9 hours later and started it and it ran...
Hello, I've taken out the blt 5 board many times early on Heidelberg Electricians found a dark spot with resistors, they soldered them, but...
Hello, on the self test the brake does not move or slip at all. I did blow it out and alot of dust came out, along with the motor.
Hello, Our CD 102-6+L 2003 Has the intermittent problem of just stopping or won't start. the Dyn codes are S-TTK FFEF and S-BLT CON BFFF. There...
Hello, We have a cd102 2003, 6 plus coater, All the motors work except # 6. The hak 2 in slot 4 is the bad board. that board is for the coater...
Hello, you won't believe this, Problem solved, First the temp limit numbers were corrupt, I put a new battery in and it works perfectly now. The...
Hello, Refrigeration gas is correct,no leaks sometimes the Refrigeration will come on for a second then shut off and the C circuit error pops...