Recent Content by Mathew

  1. Mathew
    Post

    Heidelberg PM74 2 colour 2005

    Possibly there is an error related to wash up device. Try to check the errors first
    Post by: Mathew, Oct 6, 2024 at 3:36 PM in forum: Heidelberg Printing Presses
  2. Mathew
    Post

    Manually turning SM74

    Technotrans can not stop press. What errors are shown on CP2000?
    Post by: Mathew, Oct 5, 2024 at 10:47 AM in forum: Heidelberg Printing Presses
  3. Mathew
    Post

    Heidelberg SM52 Main Motor Needed (Part# G4.101.2003)

    That's the issue: the encoder is having some problems. If you look down at the encoder from above, while the connector is positioned at the 6...
    Post by: Mathew, Sep 20, 2024 in forum: Heidelberg Printing Presses
  4. Mathew
    Post

    Heidelberg SM52 Main Motor Needed (Part# G4.101.2003)

    If it doesn't run smoothly during crawl speed and inching, most probably the main motor encoder is faulty. Have you tried to replace that?
    Post by: Mathew, Sep 20, 2024 in forum: Heidelberg Printing Presses
  5. Mathew
    Post

    Cmos battery low CP(2000) Heidelberg CD 102

    There is no physical CMOS battery for this IPCs. You need to replace the NV RAM chip. The battery is integrated inside that chip. You need to...
    Post by: Mathew, Sep 17, 2024 in forum: Heidelberg Printing Presses
  6. Mathew
    Post

    Cmos battery low CP(2000) Heidelberg CD 102

    What does it show on screen?
    Post by: Mathew, Sep 16, 2024 in forum: Heidelberg Printing Presses
  7. Mathew
    Post

    Polar 78 fail sk95

    Can you send some photos from damaged components?
    Post by: Mathew, Sep 8, 2024 in forum: Cutters and Trimmers
  8. Mathew
    Post

    Polar Mohr 115 EC-MON V.1.1

    Can you send some photos from LEDs?
    Post by: Mathew, Aug 29, 2024 in forum: Cutters and Trimmers
  9. Mathew
    Post

    Print master 74/4 not running

    None of these photos didn't help. Take photos from DYN-TEST
    Post by: Mathew, Aug 25, 2024 in forum: Heidelberg Printing Presses
  10. Mathew
    Post

    Print master 74/4 not running

    Can you send some photos from DYN-TEST screen?
    Post by: Mathew, Aug 25, 2024 in forum: Heidelberg Printing Presses
  11. Mathew
    Post

    2003 SM74 coater parts

    Any photos?
    Post by: Mathew, Jul 18, 2024 in forum: Heidelberg Printing Presses
  12. Mathew
    Post

    Wohlenberg 115 - Problem with the CUT-TEC computer

    Don't worry about the missing data, they are only BIOS settings. Possibly you need to enter to BIOS with an external keyboard as you said. Do you...
    Post by: Mathew, Jun 19, 2024 in forum: Cutters and Trimmers
  13. Mathew
    Post

    Wohlenberg 115 - Problem with the CUT-TEC computer

    No, desolder it and read the data with a programmer and restore on new component. Then you are sure about everything Good luck
    Post by: Mathew, Jun 18, 2024 in forum: Cutters and Trimmers
  14. Mathew
    Post

    Wohlenberg 115 - Problem with the CUT-TEC computer

    Hi, I'm not so familiar with these old machines, but to my experience, the reason for low performance of the PC could be the RAM. On one of the...
    Post by: Mathew, Jun 18, 2024 in forum: Cutters and Trimmers
  15. Mathew
    Post

    Machine did not run

    Hi, This is a common issue from the machines with UVM3 module. The problem indicates the failure during brake test. You need to replace UVM module...
    Post by: Mathew, Jun 14, 2024 in forum: Heidelberg Printing Presses