Recent content by mariorodriguez

  1. mariorodriguez

    Heilderberg CPTRONIC GTOZ-S gets stuck when starting (only shows logo)

    I have information about that machine. +598 95318565
  2. mariorodriguez

    I need error codes interpretation sheets for heidelberg mo-z, 1993 cp - tronic

    Hello Aboujad, You have problems with the brakes, during the brake test if the machine turns more than 4 degrees it gives an error.
  3. mariorodriguez

    Power shut off at main electrical cabinet

    PLC batery is OK?
  4. mariorodriguez

    Polar 115X (BSY ERROR 5)

    Hello, maybe CP board or SAP board
  5. mariorodriguez

    Display SM52- 5 Year 2010

    Greetings to all. Suddenly the main display of the machine became very bright, making it difficult to see the information. Has anyone had experience with this problem?
  6. mariorodriguez

    sm74 vacuum belt vacuum

    Hello, I think you should upload some photos of the errors that the machine is showing. Regarding the blower , this blower is located on the impulse side of the feeder near where the feeder drive chains are. It could also be a card problem, I think in that machine it is LTK, I don't remember. If...
  7. mariorodriguez

    heidelberg sm102

    Hello Eduardo, you have a defective printing pressure servomotor. It probably remained on a thin paper thickness and now you want to pass a much thicker paper thickness, the feeder is not activated for safety reasons.
See more
Back
Top