You tried different brand off ink. I had very good experience with this on (http://www.classiccolours.org.uk/)
What is your room temp. (should be 21-22 degrees celcius) preferable all day long even overnight.
The problem is not a mechanical one. It comes familiar to me on coated stock. Print with as little pressure u can wil help. Increasing the amount...
Especially coated papers give this problem (try another brand) ink density at startup can be to low (the amount of revolutions before starting to...
I don't think your classic rip has an option for 12 inkzones because when they released it there was no need for it. I asume the classic rip run's...
The old rip from the classic DI was set up for 8 inkzones. The plus expects 12 in the files from the rip. (this could be this problem)
X7 is giving lot's of problem's (bad connection of the 2 red wires wich are burned)
Do not no what you mean.
X7 connector.
Connect the two DI's via a switch and straight cable to the rip. Both DI's should now see the map on the rip to get the files from, this is the...
The rip doesn't pop up with a second DI automaticly (this has to installed by hand). You need indeed connect the DI's to a switch with a straight...
You could use the same que (setup) to rip files and store them in the same place as you do for the first DI (not preferable). Better is to create...
Do you need 2 different setup files (one for each DI) or can you handle it with one setup.
You sad trouble's on black after replacement but most correction are done on Cyan diode 2. On black diode 7 +5, -5 is a total correction of 0....
On the 'Classic' model the tubes were in serie and on a 'Plus' I tought the changed it to parralel. Do you change always the same diode's. Do you...
