Recent content by juntjoo

  1. pushed alchohol through to MFC-240C print head but still not printing

    If you're familiar with the method of using a syringe + tube attached to the nipple that goes into the cartridge and push cleaning solution through to printhead to clean it, I've done it and each ink passage goes all the way through to the printhead as shown by soaked paper towel placed...

  2. Where should I clean inside this toner cartridge?

    Try as I did after cleaning it, putting back together made it just as messy if not worse lol. But it appears to be leaving less spots. We'll, same amount but smaller. I just wish I knew where exactly on the insides it was leaking and how

  3. Where should I clean inside this toner cartridge?

    It's making slight marks in rows every inch down the page I'm going to clean the best I can but where should I focus? I have no idea how this thing works It's for a HP CP1215

  4. Initially ink comes out but then fades even though cartridge is full

    IDK if I'm still dealing with this particular cartridge but I deal with this issue with several cartridges. Would you know more about this issue and how to solve it? I'm thinking as I've read before it has to do with air pressure or something air related in the cartridge. Like it either...

  5. anyone familiar with refilling toner and can tell me how to fix this problem?

    https://imgur.com/a/EGnzpKK I refilled it did a messy job, but I don't even know how it works to determine where it's dirty in there that is causing the marks on the page. They're always like like this, on this part of the page, this marking pattern. Anyone know how this is happening, what I...

  6. Initially ink comes out but then fades even though cartridge is full

    This is a HP 65 cartridge refilled. Only the blue fades. I've soaked the bottom of the cartridge in alcohol and hit water. After a while it will again momentarily print but then fade. Is this a physical or electrical issue?

  7. Refilled and cleaned and leak ink but don't discharge properly

    I can fill them to the top and soak the bottoms in hot water and alcohol til the cows come home but they'll still struggle to put out ink properly. Sometimes they'll start to properly then quickly fade and sometimes leave little puddles sporadically. Mind you I DO cover the holes I puncture in...

  8. Brand new xp-960 ink not absorbing glossy side of thick cardstock

    http://imgur.com/fGF4OPC The paper is like 12pt really thick and I've tried all paper and ink settings and it just seems like the ink doesn't absorb fast enough or something. I can't imagine the paper isn't made for printing onto. The non - glossy side prints fine. It's actually cut from...
See more
Back
Top