Recent content by Impacked

Solved: Loose sensor on offlay!

Hi, We checked it according to the manual, checked with 2 lights on in the mid at 180 Degrees. Cheers, Jon

Hi, Yes machine is preset, distance to pull lay should be ok(we always run with auto pile on), as it works on all other sheet sizes apart from 720. What do you mean by Pile Stops? Cheers, Jon

Hi, It stops dead and shows up "overshoot" but the sheet hasn't actually overshot - lay sensor have been checked and are ok. Thanks

Just bumping this, we still have the problem, anybody got any ideas. It appears to be tripping on the overshoot, but is not actually overshooting. Cheers, Jon

Yes, we changed all the blankets and packings and whilst not perfect it was a lot better

Hi All, I was hoping someone could help, we have a problem on the machine where if we send a 720mm sheet though it pulls up after the first sheet, if we trim down to 718mm, it runs fine. Thanks in advance, Jon

Hi, Has anybody got any tips for printing a B1 Grey Solid(cant do a dry solid as the job has got white out text), ours tend to come out with a bit of banding. Would love to hear any ideas. Thanks, Jon

Maybe a daft suggestion but have you tried decalcifying your rollers?

Okay, thanks, I'll give it a go, but, I've always been told that you want as little water in your ink as possible.

Hi, Can anybody tell me the adavantages of running with or without the z roller engaged, we just use ours to wash the damps up. Cheers, Jon

Problems with Kodak Electra XD Plates? Hi, Does anybody have any problems with Kodak Electra XD plates? We are getting horrendous dot gain(32% on 40) and all our pumps(5 of them) have failed on the plate processor within a couple of weeks of using the new chemistry? Cheers, Jon