Recent content by iCAN4

you mean to inscribe other values, higher - lower? do you have some experiences?

The stock is a 250gsm silk coated "digital paper". What do you want to know exactly about the media settings?

This is also one of my problems. The techs have "checked everything" and say there is nothing more to do but the problem is still there. Questions: 1. Does it really come from the TAB? When I make a "hardstop" and look at the sheets after the TAB they look good, even after being fixed the...

What we did now is an update in the paper path. There are now blowers in area 6 and 7. Maybe it's not just the fuser fluid but rather the moisture on the paper after fusing it the first time. It works much better now.

You know exactly what I mean. :-)

Hi, we have two igen4 and both have the same problem. From time to time there are fine coloured lines on the paper. Sometimes M, sometimes C, sometimes K and definitively in Y the same. The lines are always in different positions. Any ideas what it is?

The tech said that this was an upgrade only for the iGen3!?!?!?

Yes, we have the one with the blade in the middle. So I will call the tech and ask him. Thanks for the moment. Nils

It is an igen4. We have two of them. One is normal Ink the other is matte. What do you mean with "LCM"? With the cleaner blade you mean the blade under the cleaner rolls cleaning the prb, right? This inboard and out board the same. It looks like a "T".

Hi, we have some problems when printing silk coated paper. After printing 2000 sheets, there are streaks and ghost images on the prbelt. The techs say it is rhe oil coming back again on the belt during the second side is printed. The only way is to change the belt or to change the paper. But...

What I forgot to tell is, that we are printing on a papersize 500x350mm and I only want to have the job (size 148x105) three times on the paper. Please don't ask why...

I'm very pleased to see, that there is a forum about the problems of digital printing, especially about the problems of an igen... I have a problem with the FreeFlow Print Server and Imposition when the size of the job (148x105mm) is smaller than the trim size (500x107mm) in the layout style...