Here’s an update a month after… Called in tech (not Komori certified) who has somewhat vast experience in Komoris. The first thing he said over...
Sorry for the late reply. Yes it’s confirmed the controller is the problem and not the encoder on the motor. Will keep you on my list in case our...
We’re from the Philippines
Sorry for the late reply but yes we also checked the brushes when we took apart the motor. Grease was all over the place so we cleaned it...
We had this recurring problem where the dampening motor stops in the middle of production. Sometimes it comes back on after restarting the...
Hi Adil. Do you mean the undercut of the blanket cylinder? The plate on the machine says it's 2.3mm. So we followed this. As to pressurization of...
Hi Jack! Unfortunately there are no komori techs in our area. But we tried re setting rollers to 4mm nips. Ink transfer to plate and to blanket...
Hi Vic! That’s what we initially thought at first. So we changed blankets, underlay packing and swapped new rollers. Also, the blue sheet is from...
Hi! We were running full solids on our Komori Sprint SII and discovered something very odd. Apparently the middle part of the cylinders are...
Hi! Had this trouble a couple of months back. Sourced manual from ToyoDenki. Fortunately I had a copy of the parameters for the machine. We reset...
Hi! Did you ever get to fixing this problem. I'm having the same problem now. Thanks!
UPDATE: We opened the side cover and discovered a jammed pneumatic cylinder, broken chain that drives the inking roller. Replaced everything.
Hi Sirs! Anybody encounter this problem before? We were washing up the machine then the operator heard a slight snap. Now the ink fountain...