My name is Greg Ross, I have almost 40 years in large format UV printing on many different types of equipment. Can help with all aspects from...
You will get a larger ink charge when the oscillation reaches the end of it's stroke. If this event occurs at the back or front of the gap, it...
Nothing works as good as UV, haven't seen a coating yet that doesn't dive on conventional
Check roller settings, if good try integrating the bridge. Sometimes the delta dampner drive will cause a disturbance in speed in the gap, the...
you're right, short grain could be a problem
If the transfer drums are in , take them out. you don't need them anyway
If you can't get one from KBA try IGT somewhere in the Chicago area.
Don,t know what to say, haven't run alcohol in 25 years
All clamps or one?
There is nothing that forces the rollers to the plate, just off the plate. if there is no damage, the end play is probably to tight.
LED has a large amount of photo initiator and it can't be absorbed by the Tyvek so it's coming to the surface, affecting the rub. if you're not...