Recent content by glamoura

  1. Registration, Pins and hanging plates

    Turbotom and Junker1984...thx guys for your detailed answers...sorry i just read your replies...

  2. register pin

    Hi>> Im just wondering, why there are register pin (plate clamps) that are partly round, full round or rectangle shapes? Is there any advantages of a particular set of pin shapes (e.g partly round combined with rectangle, etc)? My plate punch makes holes that are full rounds (2 round...

  3. Setting plate clamps' home positions for GTOV

    Hi guys... Can you tell me how to set my plate clamps to their home postions/"0" positions. I know there are mechanical stops on my clamps..but i need to know the methods to set them accurately..thx

  4. Registration, Pins and hanging plates

    Junker...how do you set "home positions" for each clamp using Grid..can you explain to me more details. My press is GTOV...thanx

  5. intermediate rollers GTO V alcolor

    Hi guys...need some basic info here.. 1.When some people here mention running their presses inter z roller disintegrated, what do they mean? is it completely pulling out the z roller from the machine or the z roller still is in contact with the plate form roller? 2. Is it possible to run this...

  6. Misregister in unit 3 GTO 4 color

    Thx man...i ll start looking at my gripper tips

  7. Misregister in unit 3 GTO 4 color

    thx for your reply man..its an old model..1987..so what are you saying that i need to replace all the grippers in the problematic unit? and do you the problem lies on the transfer or impression?waiting for your reply...

  8. GTO 52 ZP-S transfer gripper set

    Junker1984..i also have a similar problem with my GTO 4 color...but it happens with my 3rd unit...its not doubling..but its misregister...most of the time it occurs in a perfect cycle and on the gear side...what do u think is the problem...and the easiest way to set grippers...hope to hear from...

  9. Misregister in unit 3 GTO 4 color

    Hi everyone..need your help here We often experience misregister in unit 3 (magenta) when printing heavy ink covered job...the register keep moving...we tend to get more of this problem when printing with light stocks..please need your help..thx. i also need to ask how to set transfer and...

  10. ink building up on the edge of GTO alcolor pan rollers

    Hi every1.. like the title says...im having an "ink building up "prob on the edge of the pan rollers...its a GTOv alcolor...need help here..thx
See more
Back
Top