need an experienced electrician for my single colour vs34m we are based in north west england pr76en
Problem making plates on unit 3 of qmdi plus Got message never had before 'time out waiting for void signal 3' Anyone any ideas please
my qmdi after making plates was slow at changing from 500 revs to normal speed and keeps going back again.the feeder pile can be raised with the...
hi paul have hard wired the two red wires at back of x7. whenever weve had problems before with x7 it has caused the extraction pumps to switch...
it was svk3 board faulty replaced and then ok cheers eric hyde
Hi When switch machine on the extraction fans not coming on no lights come on at the console cant inch or run the machine Computer comes on...
Thanks Paul and Mr Heidelberg Its not TTK or delivery grippers have tracked down to encoder. Changed the encoder made no difference put original...
hi qmdi plus new installation checked all wires runs for 9 seconds at 3500 per hour then stops showing 15-01 fault for only a fraction of a...
Can't image or spool plates Had initial problem of blue screen with flashing cursor in bottom. Corner. Replaced SVK board and got into press...