Recent content by djicewolf

We currently have a KM6501 and are considering purchasing a KM8000, however we have heard some problems regarding toner coming off easy on 100lb Gloss cover. If anyone has any experiences with the machine, I would be grateful to hear the pros and cons. Thanks, Djicewolf

I believe we are making this adjustment in the regular screen, It seems to be okay now after we set it back to .8 So I not sure if we have a problem. Any suggestion for eliminating double imaging from the 1st unit black ink on tail end of sheet usually on 12x18" 80lb coated. Thanks for your help

We can not seem to adjust the vertical position of the image on the 4th (yellow) unit. We input a value of 40 and the image moved very little. Has anyone have any suggestions?

Unfortunately the issue with the zone 6 diode in PU4 is happening again. It definetly is not a ink particle on the glass as it is itermittent and I have plugged and unpluged every terminal plug on the 2 laser control module boxes for this unit. Sometimes it works for a couple days and then acts...

Great News! I took the N/O Side cover off and unpluged then repluged the connectors on the Laser Drive Modules for the PU4 and then followed Pauls advice with the lens cleaning proceedure and we now have all the diodes imaging correctly. The unfortunate part is I can not directly attribute what...

1997 Classic QM4-Di, I switched Diodes around from 5 to 6 and tryed replaced the diode with a spare and to no avail the problem is still there. I also pulled and replaced all the connecting terminals. The only other thing I never tried was zero off all the diode setting in Unit #4, check the...

Thanks for you reply, We have carefully checked and cleaned the lens glass and I have just changed the diode then imaged a plate and the problem is still there. When I image the calibration plate on unit 4, occasionally the 1/4" missed area images approximately 2mm in the center, with missed...

Yesterday we were imaging a plates when we noticed a unimaged vertical strip of about 1/4" on the 4th DI unit. After several attempts at restarting the press as well as sending other files it still remains. This am I tryed the band test plate and noticed it is in Zone 6 of the Diodes. Do you...

Hello everyone, I am looking for a Senstron 250W SBJ-4254 115/230v Power Supply for a 1997 QM4-DI. This a module on the Presstek power supply that supplies the 12 volt and 5 volt dc to the computer. If any one is parting out a machine, please let me know. Thanks, Djicewolf

Re: Non Imaging Spot on Plate with 4th Unit Thanks for the suggestions, I discovered it to be a piece of dry ink that somehow got under the plate material and elevated a spot on the plate which must have disturbed the focus length between the laser diode and the imaging area of the plate. Its...