Thanks
Hi Oabrahim. This failure was ramdom 3 days work without failure and 1 day 10 times error 132 & 470. So i already check oil leakage, make a...
Hi everybody Finaly the i found the problem, perharps it could serve for other user, read below. The problem came from the inductive sensor SBA....
Hi So after 1 month it work but sometime (very rare) the blade don't cut immediatly (the led on board are normal for left & right button, and...
Hi everybody. I wish you a happy new year 2022 and good health. So, i do it with Mobil Nuto H46 since 4 days. Today it work. But at this time we...
Yes sir I'm going to do it. Yes I'm convinced that I must do this before more investigation. New oil from Polar list is order. I will tell you...
Hi Sir. I allready test both cut buttons NO NC and all is clear. I check also the clutch; gap 0.7mm and clean it. i also check belts too I think...
New symptoms: When i want to cut, i push the pedal first the press goes down after i push left and right cutting button i hear hydraulics but the...
Since 1 month the Error 130 do not apear. Why ? But I still wanted to check as you wrote to me. So i have check all cable with DMM between...
I check - function and position of proximity switch B. SBE + B. SBA = OK orange light apear on it . All screw are screwed, nothing move - B. SBE +...
How can access in menue "knife gearbox - control" ? i see codes but i have no ones
Thanks for your reply, sir. I check and answer later.
Hi everybody Problem (Error 130) I'm am a printer in Europe and we have a cutter Polar Mohr 92E Sometimes the press stay down And the blade don't...