Is the surface of the roller rubber? Because it feels like hard plastic. Maybe it got harder with age. I'll try your suggestions anyway. Thanks CSF
The swing arm is still strong. I dont think this is the problem. I'll try with the sponge. Thanks ziggy33
So, I'm not the only one with this problem ;) What you're suggesting is similar to sandpaper, wright? I used a fine sandpaper to no avail. Maybe I...
The orange roller of my Astro Amc-2000/AbDick envelopfeeder seems to be to smooth. Does anybody has some ideas how to increase the friction on...
My OKI C9655 sometimes gives a loud rattling noice when the printer is working. I've tried to add a short movie but I dont know how. What could be...
I tought it must have been the motor. It's connected with normal DC (I'm not so familiar with electrics). This motor is 25 years old, so I just...
My AB Dick 9810 starts running more slowly from the moment I put on the impression. Does anybody know what could be the cause of this.
I 've allways used original parts, and set the correct settings, but now I've noticed that when I print 250gr with a incorrect setting of ±200gr...
Thanks again for your help. On paper (80gr) there's no background, on 150gr it's very slightly. I use commonly used carton. The background is a...
I only get a gray background with carton (I mainly use 250gr), and it's realy bad with glossy carton. I sometimes avoid this problem using a less...
OKI C9655 grey background I have the same problem. Changing a drum makes an improvement, changing all probably solves the problem. Even if it...
