Recent content by [=Brian=]

I think the 4.4 inch is too think. typical flat bed printers such as Mimaki UJF-605C will only allow 1.9" to pass through. But search for flatbed printers probably UV Curable as well.

No, try this www. macroenter .com/Cleaner_Fluids_s/2779.htm

You can get solutions called printhead cleaners. Such cleaners could be found here

Check http://canonipf.wikispaces.com/ huge amount of info on canon printers there.

Looks like of like head strikes to me, maybe the paper is too thick?

I checked the original photo the background looks like a peach/orange to me more than it does pink.

Show me the Carfax! I don't think it works like that for printers lol!

If anyone knows you should be able to find it here: http://canonipf.wikispaces.com/

any screen shots of the results and picture of the jpg?

On your printer go to the menu and select print color diagnostic. Could be one of your printheads are not firing.

Great, let me know how it works out. I use them for my refill cartridges and Inks which is why i knew they had those chips.

In Photoshop when you go to print. Under color handling: Photoshop manages color. Under Color Profile: Select the paper you have in the printer.

Hi Arnstein, I tried to PM you but it didn't let me. I just checked their site, but found they only had resettable chips, which could be ok, but you will need a chip resetter to about $18 more. but still better than the alternatives.

Hi Tony, if you are using photoshop to print. You need to select the profile of the paper you are using in your Printer. Basically the profile you selected when you loaded the paper. You will also need to select in the printer options allow software to manage colors and make sure that photoshop...

You could use a printhead cleaning solution. You will need refill cartridges and the solution filled about halfway in each refill cartridge and run several power cleanings with the solution. It will help clean your printhead. Check it out here