That may actually be scratches from the finisher. even though the GSM is in spec, I could almost guarantee that the caliper is too thick to...
With Inkjet you wouldn’t have to worry about fusing or transfer voltages. However you may run into issues with certain coated media if they’re not...
Those Xerox models are business class printers. They can’t even get you to 100# cover. I can almost guarantee you’ll have the same issues, if not...
As for the cyan contamination I would have to say I new drum/developer assembly should fix this issue. Especially if the drum is past it’s...
You need to replace or possibly lubricant the polygon mirror unit/motor. The mirror module in your case is in the second imaging station. this...
Bwahaha , I just spit my tea everywhere... hooohoho-heh ... hehe... heh.... hahahahaha. ok.. now for a... serious.. heh.. response. Wait. No.....
My apologies, I missed your reply. it could be black developer leaking onto the belt. Take a look at the black unit and see what you can find....
If you look at the dots under a loupe, are they composed purely of black? are they always along a linear path like in the picture?
Is that a vector file that you or a designer created? Or is it a bitmap file?
Do you have the file that you used to print the item you posted? If so can you post the print file? also let me know what device/machine you’re...
I’ve used EFIs Color Profiler Suite quite a bit in the past. You can use it to calibrate your monitors closer to your print output, as well as...
It’s not the drums that were the problem, the belt carries all four colors to the paper, So an issue with the belt will present through your...
You’ll need to make sure you have a fresh, sharp blade installed in the cutter. If it’s just the top and/or bottom sheet that suffers from...
Printing on cloth?? Good grief. let me first say that the substrate being printed on can have a huge impact on the color’s final appearance. For...
What software are you using? Place the swatch in Abode CC (InDesign) and color pick it.