The problem is original monitor is not getting the power enable(power on command) from ipc.
Problem seems in ipc not monitor
There ac supply also come (17.5 ac) in 2 pair set (cpc back pannel white cable red plug)
Pls check that also
Pls order dnk2 /dnk led display
It will work in shot
Pl reache me at email@example.com or +919818492864
You can run the ipc without ups also
For the same you have to remove wire (+) from usv and fix directly to +24 volt in press center.
Need pix of the error #12
As per your requirement you can buy sm74 four color press it .
Based in budget you can choose year of manufactur.
You can go with 1998...
Pls ans following
1) type of paper you wana print
2) job type
You can remove the ipc and put on table, just plug 230volt ac (for mc/mc2/mc3)
Ans +24 volt for mc4/mc5/mc7
Connect normal monitor, display...
Pls contact me
When we switch on the machine
Input air pressure required is 8.5 bar (error will go) and valve will open. Then supply air reduce to 6.5 bar...
1) is it only problem in display or your facing any other porblem??
For check display you can swap feeder and delivery...
We can supply used one.
We can also repair the same (it's roter of the main motor and os damged.
Reason disrt particals and not...
It's break problem, if you know how to clean/tight break then do the same other call motor mechanic he will do