Hello. Doubles the image on the axis, in left-right +-1 millimeter. Paper 65-70 grams. Print 2+0. On the service side. The double is strongest...
The pulling bar is normal and not worn out, it moves normally. Just the roller does not touch it about 4 mm.
The roller does not touch the pulling bar.
Side guide do not work correctly - sm102 Roller do not touch registration plate. But if one move side guide via cp2000 to plus/minus 1 mm, roller...
Registration Problem on every other sheet. For example: the Odd sheet number (1,3,5,7,9, etc) does not have the same calibration as the sheets...
This counter is not structurally provided. Our specialists installed it themselves 15 years ago. Now after the repair we can't set up marking...
No, Zirkon 6210.
Hello . After the repair, we can't set up the counter . it is necessary to adjust the number of sheets in the bundle, but it does not work .Help...
Hello. The risograph reduces the image by 6 millimeters compared to the specified size. Why? How to achieve the required size? Help.
Speedmaster sm102 5+lac. There are no problems with fixing the paint. Water is normal. The paint is fine. I can't move the rollers, there is a...
Greetings. Help me find a solution to my problem. On the second run, I print the front side of the sheet, the brush rollers stain the sheet. The...
