Recent content by amir norozi

I'm currently running two Heidelberg SORMZ B2-size presses (2x2 color setup), but frequent downtimes are pushing me to consider upgrading to a four-color press for faster CMYK turnaround. Most of my work involves one to three spot colors, and I mainly print on 350 GSM paperboard. I'm looking...

Hey,I've had my fair share of press headaches, but your Halm P-47 Jet situation sounds like a real nightmare. I respect how you've taken matters into your own hands—40 years in the game speaks volumes. It sounds like a sensor issue, especially with the first unit's impression being sporadic and...

When I looked into the Heidelberg SM102-4 from the late 1990s, I noticed that the CPC 1.04 console offers basic controls, while the CP2000, introduced in 1998, adds advanced touchscreen features and better automation. This is a big advantage when printing paper shopping bags efficiently, as...

To test the paper quality, I would check if it's flat, dry, and free from wrinkles or curls. I also make sure the edges are smooth and the paper isn't damp. I avoid using old or damaged paper, as it can cause jams. It's also important to store the paper in a cool, dry place to prevent moisture...

Hi! The F11 error on your SIMOREG 6RA2275 suggests issues with the tachometer circuit, such as incorrect wiring, polarity, or unstable output. Double-check the wiring and polarity. Verify the tachometer output at various RPMs using a multimeter to ensure it’s consistent and meets specifications...

I’ve been in a similar situation when updating imposition software for our catalog printing (چاپ کاتالوگ) We moved from Dynastrip to Ultimate Impostrip, and the transition was smoother than expected. Importing templates wasn’t seamless, but we managed by recreating key ones we used frequently. I...

I’ve had a similar issue with my GTO 52-2, and it was frustrating to troubleshoot. First, ensure the packing under your blanket is precise and matches the manufacturer’s specifications from the machine catalog—using 300g cards might cause uneven pressure. If the issue persists, carefully check...

I’ve been in your shoes with the SDP ECO 1630 III R when my RIP software was missing, and I had to rebuild my setup. What worked for me was tracking down the Harlequin SDP-RIP installer. I found that some equipment resellers or older service providers sometimes have archived copies.I also...

Hey there! From my experience, you can check plate usage details in the CTP UI logs or the Prinect software. In Prinect, look for production reports—they often include plate types and sizes by job. In the CTP UI, try generating a log file via the spannee menu and viewing the summary. This should...

I faced a similar issue with my Xerox 4112 EPS, where paper consistently jammed at the left-side door, and no error was displayed. Here’s how I fixed it: Inspect for Obstructions: Open the left door and check for small paper fragments or debris in the path. Paper Settings: Ensure the paper...

I had a similar issue with my UV printer. To fix it, I manually choked the white layer in my design file, reducing its size slightly. Then, I set my colors to overprint in the RIP software to fully cover the white. Also, check your print head alignment—it helped me.

I’ve worked with both the SM 72 and SM 74, and each has strengths depending on your needs. If durability and precise registration are your top priorities, the SM 72 is a solid choice, especially for high-volume jobs. However, for efficiency and faster make-ready times, the SM 74 is better...