Recent content by alx

  1. looking to buy Heidelberg.Difference between SPEEDMASTER, QUICKMASTER AND PRINTMASTER

    all parts is the same PM and SM?

  2. mov impression problem

  3. mov impression problem

    having problem with uneven print parallel to cylinder. ghosting or double image can be seen in the center only . what could be the culprit? tia

  4. mov impression problem

    2nd image. from what i understand the two arrows pointing to the 2 screws is normally connected. when plunger is down it should release the contact. unfortunately mine is always on contact whether plunger is up or down. is this normal? picture reference is the first unit.

  5. mov impression problem

    can i put epoxy to fill the hole?

  6. mov impression problem

    yes sir junker, it is without cp tronics. please see 2 images.. 1st image i found a hole in the plunger. it got stuck up. after replacing the switch with a new one, impression worked for awhile. then again becomes intermitent

  7. mov impression problem

    guys need help with impression problem. sometimes 2 to 4 unit will not engage. only 1st unit will engage impression. how can i fix this? also when the machine stops, last sheet doesnt have the last 2 unit color. tia

  8. Gto 52 counter problem

    is it this one? https://www.printersrepairparts.com/get_picture.ashx?ItemId=P-9838

  9. Gto 52 counter problem

    hi sir junker, where can i find the roller switch? you have reference picture? if electrical problem i need to call electrician. if mechanical or switch i might be able to find a solution. thanks

  10. Gto 52 counter problem

    Please help. Counter sometimes run. Sometimes stop. How do i fix this? What triggers the counter to run?

  11. dampening roller adjustment

    ink film strips?

  12. dampening roller adjustment

    how do i properly adjust alcolor dampening rollers?
See more
Back
Top