Bill I have some ideas, but this is how I make my living. Contact me at ajenkins@leduv.org I will be working in Farmingdale NY the week of Feb...
Have you check the output of the lamps? But I'm thinking its an ink problem.
Check your FS with glycol refractometer it should be below 1.8%. The reading comes from the wetting agent (sub) the lower you can get it and still...
Help! I have a client who bought a Magnum Manufacturing Limited Web Press at auction in Canada with no operators manuals. The press was built...
Check the bearer pressure and the gripper tensions. These could be creating the pattern with pulling the sheet out.
Chrome roller covered with ink is either contamination or a fountain solution problem.
Check the air pressure and make sure the check-valves are working. Is the press going through the cycle like its working? IF not it could be an...
The 1999 Heidelberg is an excellent machine as long as it has the CP2000 software. Even though the Roland does historically have some electrical...
If you choose LED-UV curing you take the heat factor out of the equation. There is a show coming up in a few weeks that may help you...
Contact INX they have a testing press made by Air Motion Systems that can show you the difference in curing between LED-UV, Convention UV and...
I have the best luck using 1/2 crown which I believe is .0025.
You can try: Pierry Manufacturing Inc 45 Rawhide Ridge Rd Bozeman, MT 59715-7961 406-585-2200 406-585-2219 fax
Thanks jdsmurf1
Thanks contractor. Asif you can email me at ajenkins@leduv.org