Adil's Recent Activity
-
Adil replied to the thread ink adhere on metering roller.
Send me picture of your pqc
Jun 8, 2023 at 6:51 PM -
Adil replied to the thread Feeding for dummies (Speedmaster CD102).
Which machine you have sir and which support do you use too ( paper , cardboard ...etc ) and thikness of support and i will guide you ....
Jun 7, 2023 at 8:51 PM -
Adil replied to the thread ink adhere on metering roller.
Hi sir that's why I asked you to confirm that you don't have the intermediate roller, your problem is called the unstable emulsion at...
Jun 7, 2023 at 8:46 PM -
Adil replied to the thread Cp2000 got stuck.
That s why i told you sir to take video of the black page when the machine start to see what happend
Jun 7, 2023 at 8:01 PM -
Adil replied to the thread Cp2000 got stuck.
If swotching to second hard disc not fix the issue , then we can talk about setting of bios on the ipc , youneed to check date setting...
Jun 7, 2023 at 7:58 PM -
Adil replied to the thread DryStar 3000 Combination/ Coating SM/CD 102 Plus - #90 ERROR in Dryer.
Is this machine cp2000 ?? Please enter to the varnish menu and give me the code of issue ,
Jun 6, 2023 at 6:54 PM -
Adil replied to the thread Technotrans compressor not working.
You need to searsh the cause of this issue . you may be able to find a leak somewhere. check at the level of the main circuit valve, at...
Jun 6, 2023 at 6:47 PM -
Adil replied to the thread Cp2000 got stuck.
Hi sir . before the machine hangs on this display is a black page of the bios displayed at the start quickly and setteint if so, please...
Jun 6, 2023 at 1:40 PM -
Adil replied to the thread ink adhere on metering roller.
Hello sir , is this a komori machine ?? I think you don't have an intermediate roller on the machine, please confirm to me and tell me...
Jun 6, 2023 at 8:50 AM -
Adil replied to the thread sm74-2p problem.
I think it s ok , but when people fix the issue normaly must send a message to confirm or to thank the person who give him the solution...
Jun 5, 2023 at 4:34 PM -
Adil replied to the thread sm74-2p problem.
on the X11 sheet, pin number 1 is mentioned on the right and it is from there that you can start calculating from right to left. you...
Jun 3, 2023 at 5:36 PM -
Adil replied to the thread sm74-2p problem.
Remember at the same time . Put jumber on 9_10 and 11_12
Jun 3, 2023 at 1:04 PM -
Adil replied to the thread sm74-2p problem.
Please sir do that and your issue will be done Switch off the machine ،do this procedure for 30 seconde carefully and switch on the...
Jun 3, 2023 at 1:04 PM -
Adil replied to the thread Hiedelberg 102 5 col with perfector..
Hello sir , you need to change the machine mecanically to straight mode and then reset sak board . Good luck
Jun 2, 2023