If you are doing any plate changes you need to ensure the press is in order, rollers set properly, new packing and blankets, cleaned and flushed...
I personally wouldn’t use a converted press unless it has been done properly by the press manufacturers, it isn’t just a case of putting on a UV...
You may have a blockage in the technotrans ejector block one of the blue nozzles may have some debris stuck in them, be careful on removing and...
I would view the Anicolor as purely a four colour press. I would also have an Anilox coater. As long as you are running the same stock you can...
I looked into HUV when it was first introduced, working with various companies across the world, encompassing Demonstrators & experts, this was...
You can try a tape & rub test, the supplier should have done those as part of their procedures. It is possible if you subjecting the sheets to a...
I would also go for a high pile delivery with a coater, If don’t know what you are looking at get a survey by Heidelberg, Komori. Don’t fall for...
Unfortunately it is problem I have seen on conventional, Standard UV & HUV Komori's, it more pronounced on HUV having to clean the forum rollers...
I find it depends on your electricity supply if you are prone to power cuts then it doesn't matter what press you have, it can blow the boards of...
There Is Some LE-UV, H-UV, LED-UV Info Further Down The Forum I Did Some Testing Three Years Ago I Am Informed That The Ink Has Been Changed Since...
If You Out Of Temp Range Then You Either Speed Up To Drop Density Or Slow Down To Increase If You Want Permanently Change The Density Then You Can...
I Expect The Management/Salesmen Have The Latest Cars And They Cleaned And Serviced As The Manufacturers Spec, They Never Think That Looking After...
Basically it allows you to dry the printed surface before going into the next unit to avoid marking allow overprinting or perfecting you need to...
Hi Shart I have tested three inks concerning HUV, Toyo has always been the best performer dont know what your requirements are, need to look at...
It depends on the work you are doing and the shifts you are running, If you employer thinks you should be doing it more often then there may be...