On our DPM 34 HSC we can't load the plate material. We went to put in a new roll and got this error PCC event #6040 Internal Error, Please Retry...
We had this same problem. You are a life saver this worked! after following this enter SF enter 3 enter + enter 7 enter + enter 92 Our screen read...
No. we are going to try and order a new roller and se if that help. When we measure the roller it seems to be the right thickness. The adjustments...
Yes that's what we are doing counter or anti-clockwise bus it does not do anything. We have turned them like 9 or 10 rotations and it doesn't...
We bought a used QM 46 / 2 color press and are trying to get it set up to run. We are trying to set the stripes. We set 3 form rollers to the...
Update: We replaced the sensor and that did not help. we are still down. Mark Andy believes it may be a software issue.
The sensor has 6 wires on it.
We are pretty sure we found the sensor but that video does not seem to be the same kind of sensor. We believe the little black box is the sensor....
Where is the sensor for and how do we test it?
We are not sure it is the attenuator. When we send a plate to print you can hear the laser come on but the machine does not continue printing the...
We cannot get our Ab dick Dpm 34 HSC to print.[ATTACH] We can't even get it to print a test plate. At one point I was able to get a plate to print...