Roland 700 Eltosch UV LAMP EPS ERROR

Discussion in 'Man Roland Printing Presses' started by Moni Patel, May 11, 2023.

  1. Moni Patel

    Moni Patel New Member

    Joined:
    Dec 2021
    Messages:
    4
    Location:
    India
    I am having this error in my machine. Kindly guide how to solve this error.
     

    Attached Files:

  2. Rohit kutlehria

    Rohit kutlehria Member

    Joined:
    Oct 2022
    Messages:
    15
    Location:
    Kangra
    Did you check contactor for this eps, if not then check .
     
  3. Moni Patel

    Moni Patel New Member

    Joined:
    Dec 2021
    Messages:
    4
    Location:
    India
    Please share you contact number..
     
  4. CHOCK

    CHOCK Senior Member

    Joined:
    Dec 2016
    Messages:
    2,852
    Location:
    Managua,Nicaragua
    Hi sir;

    According with the Diagnostic in the Screen, please review the Input phases in your machine, tight very well the lines for loose wires, or oxided wires, measures the Input Fuses, and test the C. Breaker for open and Reset again, remember, look and tight very well the wires, and clean for oxide!

     
    Nouman Javed Hakim Kh likes this.

  5. er.bajaj001@gmail.com

    er.bajaj001@gmail.com Member

    Joined:
    Aug 2015
    Messages:
    78
    Location:
    India
    Seems Like Your EPS is Having Phase Issue
    Please Contact, +9181066-66607
     
Loading...