Polar 115 EMC tank capacity and type of hydraulic oil used

we are in the process of changing the hydraulic oil, I looked at the service manual and I could not find anything regarding the tank capacity or the type of hydraulic oil used for Polor 115 EMC

 

Hi sir;
1) For Polar 115 EMC = 30 Litters

2)Hydraulic Oil types;



Blessing

 

Thank you very much

 

this is the oil level at 35 liters

 

ok, Did you change it? or Refill??

anyway, did you make the Bleeding in his system??

Remember , otherwise you will have trouble. do it please

 

Good afternoon, I am having problems with the "second" pressure of my emc 92 polar guillotine

I bought it recently and I don't have the manuals, we changed the hydraulic oil since the one it had was the original one.

The hydraulic oil that we put is 68 shell, I don't know if it is the correct one. Looking at this question I see that it is 46 and not 68 as we put

The oil heats up and the pressure stops working when I cut. Everything moves me, it does not put pressure. Could it be because I put a hydraulic that does not correspond?

 

1) The viscosity must be the same, otherwise, what you say will happen when it gets hot.

2) However, if you bleed correctly the guillotine should work.