Xerox Fuji Versant 80 Fault Codes

Discussion in 'Xerox Digital Presses' started by CHIPO, Jun 15, 2019.

  1. CHIPO

    CHIPO New Member

    Joined:
    Jun 2019
    Messages:
    4
    Location:
    SANTA FE, NM
    Hello I have a versant 80 with an error code, 044-383.
    on the IOT the copy option is faded, I need a more detailed description
    of the code, the manual says just engine failure, call system administrator.
    but I like to know if it is something I can fix, or I have to wait for the
    tech to fix.
     
  2. adriansto

    adriansto Senior Member

    Joined:
    Apr 2011
    Messages:
    141
    Location:
    somewhere in europe, near Black Sea
    Can be shorted out yellow toner cartridge motor. Found yellow toner cartridge was solidified and bound up the motor. When the motor shorts out it blows the F3 fuse on the paper handling pwb as well. when doing an ohm check the bad motor shows zero resistance. Good motors have some resistance.
    If you want to selfservice the machine why dont buy service manual ?
     
  3. CHIPO

    CHIPO New Member

    Joined:
    Jun 2019
    Messages:
    4
    Location:
    SANTA FE, NM
    Thanks, I will check that tomorrow and also look into buying the manual.
    I noticed a lot of yellow toner all over the machine
     
Loading...