Heidelberg PM46 pile height problem

Discussion in 'Heidelberg Printing Presses' started by SAICPRINT, Feb 7, 2019.

  1. SAICPRINT

    SAICPRINT Member

    Joined:
    Feb 2014
    Messages:
    44
    Location:
    Chicago
    New to the PM46, so far so good but the pile height will only reach
    middle mark making it difficult to feed heavy cardstock.
    The control knob is all the way turned to to right and the paper
    stops at middle mark not top mark for thick paper.
    Any ideas on how to adjust this ?
    Thanks
     
  2. CHOCK

    CHOCK Senior Member

    Joined:
    Dec 2016
    Messages:
    2,852
    Location:
    Managua,Nicaragua
    Hi sir:
    1) Try to clean very well the encoder and tight very the connections and clean with special contact cleaner
    2) adjust the encoder in way the switch plate must be pass in the middle without touching.Very well clean it...!
     
  3. SAICPRINT

    SAICPRINT Member

    Joined:
    Feb 2014
    Messages:
    44
    Location:
    Chicago
    Chock
    Where is encoder located on press?
    Thanks
     
  4. realaqu

    realaqu Member

    Joined:
    Apr 2009
    Messages:
    54
    Location:
    Boston
    you need to order parts no.
    a1.017.533
    from heidelberg which is a guide piece
    no 28 on attached picture
    B7915625-5F63-4B66-9C41-1B48B782FCB4.jpeg
     
    Rvandyke likes this.

  5. CHOCK

    CHOCK Senior Member

    Joined:
    Dec 2016
    Messages:
    2,852
    Location:
    Managua,Nicaragua
    Hi sir:
    see it
     

    Attached Files:

Loading...