Xerox Workcentre 7775 Printing Streaks and Lines

Discussion in 'Xerox Color Laser Printers & Color Copiers' started by Dave Paul, May 31, 2018.

  1. Dave Paul

    Dave Paul New Member

    Joined:
    May 2018
    Messages:
    3
    Location:
    Calgary, Canada
    I Have a Workcentre 7775 that has some print quality issues and I'd appreciate any advice going on what the cause is likely to be. Attached is a copy of the Drum Test. I switched the Cyan with Yellow drum and the lines are yellow after printing. I also see the lines pattern on the transfer belt. I would appreciate some help on this issue. I replace the Magenta drum, it didn't resolve the problem. still printing streaks
     

    Attached Files:

  2. OkiTech

    OkiTech Senior Member

    Joined:
    Jan 2008
    Messages:
    823
    Location:
    NEW JERSEY
    You can measure the distance between flaws - they would be equal to cirumference of the roller that is bad. Drums are much larger to give you repeat flaws this often. Is there a ITB cleaning device, like a blade? on some machines it is user replaceable on some it is not. How does your fuser looks like? I have a feeling that it may look like crap. Also it can be something stuck on the Magnetic roller of Magenta Developer Unit and leave impression this often. I am not a Xerox tech, Phaser 7800 is the biggest Xerox I would opt out to work on but out of general knowledge.... and since nobody else wants to chip in...
     
  3. OkiTech

    OkiTech Senior Member

    Joined:
    Jan 2008
    Messages:
    823
    Location:
    NEW JERSEY
    Have you been printing a lot of labels by any chance?
     
  4. Dave Paul

    Dave Paul New Member

    Joined:
    May 2018
    Messages:
    3
    Location:
    Calgary, Canada
    Thanks for the response. I figured it out. The Roller on the Magenta Drum went bad.
     
  5. Dave Paul

    Dave Paul New Member

    Joined:
    May 2018
    Messages:
    3
    Location:
    Calgary, Canada
    Thanks for the response. The problem was bad roller and the Magenta Drum
     

  6. OkiTech

    OkiTech Senior Member

    Joined:
    Jan 2008
    Messages:
    823
    Location:
    NEW JERSEY
    I would suspect that this could be bad PCR (primary charge roller) on the drum, certcertainly looks like it but you said that drum unit is brand new....
     
Loading...