Piller ir dryer

Dear all,
I'm looking for manual for a PILLER IR Dryer:
VERSION: SM102/CD102
Standard delivery, ink
Software Version: V0.63

 

Hi sir :
Hope you are well.
What is his the problem with his machine?

 

Hi Chock,
Every thing seems to be ok (no error on the comcon), green led on, but the dryer wont start when the press is printing?
note: the dryer never worked before, no one tried to use it until last week.

 

Hi Sir:
Let me try to help you, use his schematic diagram SM/CD/102
1) Measure the input Q12 -3 phases switch for Voltages 220 or 380Vac .Tight very well the lines Ground,and Neutral.
2) If there are input-measure the output of Q12 L1-L2-L3
3)See if there are input Voltages(L1-L2-L3) in Bridge Rectifier GF1,consequently must be there output Voltages for+10Vdc +24Vdc
4) If there are o.k the output Voltages DC Reset all this C.Breakers :M-F2 -M-f3-M-f4-M-F5. There are critical for machine function properly..
5) After you did, and everything is O.k. Test if the Dryer Start with the Press printing.
Let me know any question

 

I don't have Q12 in the system but 413vac is present on Q12 Q70 Q71 Q30 Q90 Q100 A30.1 and A30.2

I have no bridge rectifier but a transformer with a built-in bridge rectifier input 3x414Vdc output 25.79vdc 11.9 vdc and 10.1 vdc

I reset all the breakers and they seems to be ok

Still not starting while printing

 

Did it ever get tied in to the STA interface upon installation?

 

Yes, I checked the connections to the press and seems to be ok, I don't have the wiring diagram.
At least when I press the emergency stop on the press it appears on the dryer.

 

STA

 

Thank you so much, the diagram really helped me solving my problem.
Thanks a gain.

 

Was hoping it would be an easy problem to resolve! Happy to help.

 

ok sir,was a pleased to serve you. Let me know if you need more assistance.