Heidelberg QMDI 46-4 Plus/ is it good choice?

Discussion in 'DI Presses' started by Matek, Oct 15, 2017.

Tags:
  1. Matek

    Matek New Member

    Joined:
    Oct 2017
    Messages:
    1
    Location:
    Slovakia
    hello, im considering purchase this machine. Question is if its right machine for my intensions, Id like to press around 100-200k sheets per month, 3pantone colours +glossy lacquer on etiqutte 100 x 250mm. Combined with Heidelberg cylinder die cutter. I know there are better machines, but i really like dimensions of this one. Looking for any advices, every opinion is good for me. Thank you.
     
  2. CHOCK

    CHOCK Senior Member

    Joined:
    Dec 2016
    Messages:
    2,852
    Location:
    Managua,Nicaragua
    Hi sir.
    I hope you are well.
    Heidelberg Advantages:
    Direct Imaging technology of the Quickmaster DI Plus allows extremely fast production of short color runs while ensuring top “print” quality. It meets the fast growing demand for smaller editions, up-to-the-minute content, low storage costs, on-demand printing and the ability to precisely address different target groups.
    By other side.
    The group Heidelberg is Unique: 1) Background around of the world 2) Supply 3) Assistance for service Tech,Etc.
    4) And finally Heidelberg system provide a Good Profit Resell .
     
  3. augustov

    augustov Senior Member

    Joined:
    Aug 2011
    Messages:
    171
    Location:
    Colombia
    For me the best press is the plus, because is the most current in the market and work nice, i loved the plus because i can use my plate own system that used cheap plate, and can make modification special for paper or material that no can put in any offset press. Is very faster. Work nice.
    I not like pro for the feeder system, why? Because this have short feeder pass paper and put directly to blanket, so you can use for example tyvek paper, plastic, carton special, very small enveloped, or polyboard paper (very dificult in other press to print, in a qmdi is how kid stuff), is a big value a press that can print in this material, is when a gto o speedmastee press can't win (any press in the world can't win) this make the qmdi46 plus very special and make a big money to your company. I did and patented my own clamp plate system, and i use plate sheet waterless making this press more special and make a great ecomical cost from other press. Is faster and clean very well. Have spare and part in any place.
     
  4. mark1992

    mark1992 New Member

    Joined:
    Jun 2020
    Messages:
    2
    Location:
    Canada
    There are 35 times for one plate, do I need to install 4 palte for one machine?
     

  5. Risu

    Risu Senior Member

    Joined:
    May 2012
    Messages:
    109
    Location:
    Finland
    Yes 4 plate rolls, but you don´t have to burn any more than needed for the job.
    If you need only one color then only one roll needed.

    Classic DI for sell 4000 eur, many spares. Good affordable RIP can be bought from forum memeber from Colombia. Di located in Finland.
     
Loading...