Fiery on DC260 Wont Boot

Discussion in 'Fiery RIPs' started by MattFarrell, Sep 22, 2017.

  1. MattFarrell

    MattFarrell New Member

    Joined:
    Sep 2017
    Messages:
    2
    Location:
    Ontario, Canada
    Our Fiery mounted on the back of Xerox Docucolor 260 won't turn on.. The leds on the ethernet connections (to the printer and to the interweb) are green, so the power supply is working. Nothing is displayed on the little screen, and the fans don't spin. Tried everything (turning off over night, removing small battery, connecting monitor to see if there was an error code).

    Any help would be much appreciated
     
  2. adriansto

    adriansto Senior Member

    Joined:
    Apr 2011
    Messages:
    141
    Location:
    somewhere in europe, near Black Sea
    Probably software corruption or bad hdd.
    You need to reinstall the system software.
     
    MattFarrell likes this.
  3. MattFarrell

    MattFarrell New Member

    Joined:
    Sep 2017
    Messages:
    2
    Location:
    Ontario, Canada
    Thanks for the quick reply! Is there a guide on how to do that? We bought the machine (and fiery) from an old print shop, and no installation discs were included.

    Thanks again!

    Matt
     
Loading...