KMS Updating

Discussion in 'Komori Printing Presses' started by spoonder, Nov 7, 2011.

  1. spoonder

    spoonder Member

    Joined:
    Oct 2011
    Messages:
    16
    Location:
    Netherlands
    Any printers here with the option Update KMS on the press?
    Any thought about this good option?

    But is don't worked that fine for me..
    I only update whit a clean start. So new inks, new paper. Damp lowest as possible.
     
  2. Meny

    Meny Senior Member

    Joined:
    Apr 2008
    Messages:
    773
    Location:
    Israel
    Are you talking about UPDATE on KHS-AI ?
     
  3. spoonder

    spoonder Member

    Joined:
    Oct 2011
    Messages:
    16
    Location:
    Netherlands
    Yes
     
  4. Meny

    Meny Senior Member

    Joined:
    Apr 2008
    Messages:
    773
    Location:
    Israel
    Well , in this case i can tell you it works very well but before it can do you any good you must accept that it is not the system that is working for you but you working for the system..... and once you accept this , the system will strat doing you good ....:)

    If you keep everything like in the book , it's a very good system , but if you do not keep all by the book , it can be a messsssssssss....

    Good luck :)
     
  5. spoonder

    spoonder Member

    Joined:
    Oct 2011
    Messages:
    16
    Location:
    Netherlands
    Thanks Meny
    I am going to study the book tomorrow. Whe have 1 of the first presses with KHS-AI. We had several instructions from the instructor.
    I realy want to work with this AI...
    Do you have jobs where you defenitly not would update? So yes, what sort of jobs then? Like 5% image on the scheet.
     

  6. Meny

    Meny Senior Member

    Joined:
    Apr 2008
    Messages:
    773
    Location:
    Israel
    The nice point about the AI system is that the more you update , the better it becomes , and the closer to perfect you get on your next jobs.
    It is all about getting make ready time even shorter by hitting the bull's eye on every shot.
    So if you do not use it for a job , it is not a big issue , but as it is "the pres learning curve" , in fact it coulkd be that the first jobs that are "out of range" like a 54% ink coverage , will be "out" , but the more you use & update , the closer you get.
    Good luck
     
Loading...