C6000 and ICC profiles

Discussion in 'Canon imagePRESS Digital Presses' started by Jasonm, Jul 8, 2008.

  1. Jasonm

    Jasonm New Member

    Joined:
    Jul 2008
    Messages:
    2
    Location:
    Wisconsin
    We have a canon 6000 and would like to simulate our offset press by using and ICC profile. When I apply the profile I get a gray background screen I have tried all the rendering intents and get the same result. Is any one else out there using custom ICC profiles for the canon with any luck?
     
  2. billy

    billy Member

    Joined:
    Jul 2007
    Messages:
    43
    Location:
    Philippines
    where did you get your simulation profile? Is it customized by you?
     
  3. Jasonm

    Jasonm New Member

    Joined:
    Jul 2008
    Messages:
    2
    Location:
    Wisconsin
    Yes, I made it with Profile Maker.
     
  4. billy

    billy Member

    Joined:
    Jul 2007
    Messages:
    43
    Location:
    Philippines
    you might want to check your paper if there is an OBA. During the creation of profile, you should have check the box for correcting the OBA. This is one cause. Try to select the quick rather than the full source or full output. By the way, the imagepress can not pass the ISO 12647-7 or the Gracol G7. The Gamut is small for the printer to simulate the Gracol or ISO.:D
     
  5. bestrepro

    bestrepro Member

    Joined:
    Sep 2008
    Messages:
    18
    Location:
    nexpress
    Basically the Red of ISO is too m:much for the ImagePress to cover.:p
     
  6. digitalguy

    digitalguy New Member

    Joined:
    Aug 2009
    Messages:
    3
    Location:
    newyork
    It sounds like you selected simulate paper whiteness in your profile which is resulting in the gray background.

    --Digitalguy
    www.digitalpressreview.com
     
  7. kt89

    kt89 Member

    Joined:
    Feb 2009
    Messages:
    7
    Location:
    Somewhere out there...
    imagepress....ISO 12647-7

    the imagepress has been awarded the ISO 12647-7
    http://www.canon-europe.com/about_us/press_centre/press_releases/business_solutions_news/1h09/iso_validation.asp
     
  8. bestrepro

    bestrepro Member

    Joined:
    Sep 2008
    Messages:
    18
    Location:
    nexpress
    Last edited: Aug 13, 2009

  9. kt89

    kt89 Member

    Joined:
    Feb 2009
    Messages:
    7
    Location:
    Somewhere out there...
    C1 and C1+ uses the same toner, except for the additional clear toner
     
Loading...