Xpe-09-4052

Discussion in 'Xerox iGen3, iGen4, & iGen5 Digital Presses' started by Printerdroid, Oct 20, 2014.

  1. Printerdroid

    Printerdroid Member

    Joined:
    Aug 2014
    Messages:
    8
    Location:
    MIDWEST USA
    Has anyone had any experience with this iGen4 fault code? XPE-09-4052

    Looks like a power supply issue.

    Any ideas?

    also getting XPE-03-4017 code in addition to the first. (this one is a M ROS issue from previous posts in the forum).
     
  2. peels

    peels tree killer :)

    Joined:
    Dec 2010
    Messages:
    1,113
    Location:
    southeast iowa, usa
    does it happen immediately upon startup, or a little bit after it starts to run? that one sounds familiar to me.... what does the error call itself in diagnostics?
     
  3. Printerdroid

    Printerdroid Member

    Joined:
    Aug 2014
    Messages:
    8
    Location:
    MIDWEST USA
    I would say it shows up immediately.
    The log lists the fault as: Charge 2 (Y) AC HVPS missing DC input voltage.
    which would indicate a power supply issue or perhaps a controller or (distribution) board issue.
     

  4. Milo Wilson

    Milo Wilson Senior Member

    Joined:
    Dec 2007
    Messages:
    477
    Location:
    Arkansas
    Try deoxit on the related power causing the issue. Follow the connectors from LVPS to the affected PWB and clean all connections between
     
Loading...