Question about a "linen type" stock

Discussion in 'Xerox iGen3, iGen4, & iGen5 Digital Presses' started by MiloWilson, Jan 20, 2015.

  1. MiloWilson

    MiloWilson Member

    Joined:
    Apr 2008
    Messages:
    6
    Location:
    St. Louis
    Got a question about running on a "linen" stock that is made in France. It is a fake linen type where one side is a little rougher than the other. I think the stock is ARJO Wiggins. The weird thing is it is gloss on both sides. When I try to set stock attributes it won't allow me to use gloss setting with rough.
    It is a 310 gsm. I have maxed out the transfer setting on one side at 200 and the ATA is enabled in NVM.
    The one side that is rougher can't fill in very well but the smoother side prints nice.
    Any hints or tips about trying to get the pits to fill in better?
     
  2. Milo Wilson

    Milo Wilson Senior Member

    Joined:
    Dec 2007
    Messages:
    477
    Location:
    Arkansas
    Update:
    Ended up being the nip out of adjustment. Didn't have the correct paper to adjust before working on other issues and then forgot that I hadn't checked it before running some test prints.
     
Loading...