Media Settings

Discussion in 'Xerox iGen3, iGen4, & iGen5 Digital Presses' started by RMiGen, Jun 15, 2011.

  1. RMiGen

    RMiGen Senior Member

    Joined:
    Sep 2010
    Messages:
    171
    Location:
    USA
    What does the "Thickness" category relate to? We are running some paper at 350 gsm and the thickness is set at 351 when the max is 500. Does it matter what I put for the thickness in terms of toner transfer? Does making the thickness go higher have an effect on runnability?
     
  2. igen jim

    igen jim Member

    Joined:
    Jun 2009
    Messages:
    40
    Location:
    Dallas, TX USA
    RMiGen
    The thickness has to do with the charge at Transfer and Temp of the fuser roll to seal the toner to paper.
     
Loading...