image reg. set-up n

swifty

Senior Member
Joined
2008
Posts
69
Geo
Arlington Ma.
Side 2 was printing skewed on 12x18 80lb gloss text...after I went a did the dco610 set up..pain in the arse x 3 ... the color registration is all messed up and I cant
print anything but black...any help would usefull
 
Image Registration

Swifty

I assume that you performed dc610 IOP setup. This is only for Image on Paper registration. If your Image on Image is off, you need to performe IOI registration.
Also, you may have a bad file. Did you try to print a file that you know is good.

Good luck
lopeza
 
    • What size paper did you run it on. Can you also tell me what level of software the PSIP is on if you are running an iGen4.

    If you have access to DC610 IOI (note IOI not IOP) run Auto setup to bring the 4 colours back into spec then run IOP again

    --
    Mark
     
    You must log in or register to reply here.
    Forum posts represent the experience, opinion, and view of individual users. The Color Printing Forum does not necessarily endorse nor share the view of each individual post. When making any potentially dangerous or financial decision, always employ and consult appropriate professionals. Your circumstances or experience may be different.

    Similar threads

    peels
    06-3800 image transmission fault
    Replies
    8
    Views
    2K
    peels
    peels
    Side 2 Image Quality Issue
    Replies
    4
    Views
    2K
    Biggs
    Biggs
    Image not adhering
    Replies
    7
    Views
    3K
    peels
    peels
    Igen 5 Image Transmission Fault
    Replies
    2
    Views
    4K
    Phylex
    Image Quality Issues. Any thoughts?
    Replies
    5
    Views
    4K
    Ralph327
    Back
    Top