Finisher loses connection, causing XPI 03 3000

Discussion in 'Xerox iGen3, iGen4, & iGen5 Digital Presses' started by Kiran04, May 19, 2016.

  1. Kiran04

    Kiran04 Senior Member

    Joined:
    Aug 2014
    Messages:
    165
    Location:
    Santa Fe
    Title says it all. My finisher has been dropping out of connection on the press, causing a fault that forces me to restart. Sometimes when I restart it doesn't come up in the boot sequencer. Have replaced ethernet cable leading to the finisher, but that fixed the problem only temporarily.
     
    Kiran04, May 19, 2016
    #1
  2. peels

    peels tree killer :)

    Joined:
    Dec 2010
    Messages:
    1,113
    Location:
    southeast iowa, usa
    had this with my stacker, a LONG time ago. but it only turned out to be the electrical plug was backed out slightly...... turn of igen reseat that plug.

    any other non communicating module problems have been boards. :(
     
    peels, May 24, 2016
    #2