copy quality issue...have not seen this one before

Discussion in 'Xerox iGen3, iGen4, & iGen5 Digital Presses' started by Swifty2, Jun 13, 2013.

  1. Swifty2

    Swifty2 Senior Member

    Joined:
    Mar 2013
    Messages:
    300
    Location:
    Ma.
    Do a proof..looks good...release the job and the job color does not match the proof:p:mad:
     
  2. iGen4_Fiery

    iGen4_Fiery Member

    Joined:
    Jan 2013
    Messages:
    26
    Location:
    Leicester UK
    How far out is it? The colour does change slightly each time the iGen cycles down.
    Also what RIP are you using as we had some trouble with our Fiery not holding any colour corrections that we made.
     
  3. MarkD

    MarkD Senior Member

    Joined:
    Apr 2012
    Messages:
    344
    Location:
    UK
    I advise never to use proof. Always print 1 set of the job, if it is only 1 sheet preferably a minimum of 20 sheets to enable the reg to learn properly

    --
    Mark
     
  4. peels

    peels tree killer :)

    Joined:
    Dec 2010
    Messages:
    1,113
    Location:
    southeast iowa, usa
    i never use the proof. Probably not going to now...Your post makes me nervous....

    Sometimes I copy the file and hold it..or just run the file itself one sheet...
     

  5. Swifty2

    Swifty2 Senior Member

    Joined:
    Mar 2013
    Messages:
    300
    Location:
    Ma.
    xerox free flow..yes the proof and job were far off enough that a color blind ******* like me
    can see the difference in a pantone 300 blue LOL...A re-start and a color check got it back to very close sellable match...
    forgot to mention the software team added a patch that morning LOL
     
Loading...