fine lines at the edge of paper

Discussion in 'Xerox Digital Presses' started by rawmeen, Nov 20, 2015.

  1. rawmeen

    rawmeen Member

    Joined:
    Oct 2014
    Messages:
    12
    Location:
    canada
    Hi,
    We're having an issue with our xerox 700 ... most prints have a thin black lines on the edge of the long side of 8.5 x 11.
    Not sure why as this is supposed to be the unprintable area.
    Since I'm a noob, thought I ask for your help.

    This is what it looks like :
    l l l l l l l l l l l l l l l l l l l l l l l l l l l l l

    Thank you for any suggestions.
     
  2. InterfaceP

    InterfaceP Senior Member

    Joined:
    Sep 2013
    Messages:
    189
    Location:
    Dallas, TX
    Your CIS sensor is probably dirty. Clean it, and if it is still there you can move the lines all the way back.
     
  3. rawmeen

    rawmeen Member

    Joined:
    Oct 2014
    Messages:
    12
    Location:
    canada
    Thank you for your reply.
    Is moving the lines all the way back something you could explain more? Not sure how to do that.
    Thanks again.
     
  4. InterfaceP

    InterfaceP Senior Member

    Joined:
    Sep 2013
    Messages:
    189
    Location:
    Dallas, TX
    NVM Locations 746-125 and 746-126 = 50

    This will move them back to the furthest position.
     
  5. rawmeen

    rawmeen Member

    Joined:
    Oct 2014
    Messages:
    12
    Location:
    canada
    Thanks so much for your assistance.
    I changed the positions to 50 from 100 but the problem is still there.
    If you can think of any other solutions that I could try please share.
     

  6. rawmeen

    rawmeen Member

    Joined:
    Oct 2014
    Messages:
    12
    Location:
    canada
    Just wanted to thank you again for the guidance .... the NVM locations that had to be changed to 50 were 746-939 and 746-940.
    I'm assuming these are the other sides of the sheet and took care of our issue. Many thanks.
     
Loading...