Clear Toner

Discussion in 'Xerox Digital Presses' started by Jimmer, Dec 4, 2014.

  1. Jimmer

    Jimmer Member

    Joined:
    Oct 2010
    Messages:
    8
    Location:
    Canada
    Does anyone know of a way to disable the clear toner usage on a job to job basis, is there something in diagnostics that allows it to be turned off, not all jobs are rough textured linen etc.
     
  2. Schweem

    Schweem Member

    Joined:
    Apr 2014
    Messages:
    43
    Location:
    United States
    What machine do you have?
     
  3. Jimmer

    Jimmer Member

    Joined:
    Oct 2010
    Messages:
    8
    Location:
    Canada
    Xerox 1000 sorry it was not clear I thought I was in the Xerox 800/1000 forum
     
  4. Schweem

    Schweem Member

    Joined:
    Apr 2014
    Messages:
    43
    Location:
    United States
    We have a 1000 and I'm a bit confused by your question. In order for us to use the clear coat we have to tell the machine to do it. Are you saying your machine clear coats everything?
     
  5. Jimmer

    Jimmer Member

    Joined:
    Oct 2010
    Messages:
    8
    Location:
    Canada
    OMG Just want to shut it off, the machine uses clear toner at all times when running textured stocks. its not like you are adding another image, it does it by itself - automatically, looking for a way to disable. The machine will do a spot or a flood, just want to disable for other uses.
    I believe this is clear - ha ha
     
  6. Schweem

    Schweem Member

    Joined:
    Apr 2014
    Messages:
    43
    Location:
    United States
    Under Image Quality go to Use Embedded Clear as your default. Then if no embedded.....no clear coat. I know our 1000 does not automatically clear coat when we print textured.
     
  7. Jimmer

    Jimmer Member

    Joined:
    Oct 2010
    Messages:
    8
    Location:
    Canada
    clear coat

    I am not making myself clear

    All the 800 - 1000 series add clear in a small amount, yours does as well, you just do not see it.

    Check your levels if in doubt even when the file does not call for it, it still dispenses clear toner as it images.

    Looking for a way possibly in a diagnostic setting to cut out the use.

    Think this is clear this time
     
  8. Schweem

    Schweem Member

    Joined:
    Apr 2014
    Messages:
    43
    Location:
    United States
    Interesting. We've had our 1000 for a long time (over 5,600,000 imp) and if it is always dispensing clear toner the amount is negligible. Otherwise I would have been ordering a lot more clear toner. If it is, it could be the machine has to.
     
  9. kirkecia

    kirkecia Member

    Joined:
    Feb 2015
    Messages:
    6
    Location:
    Orange County, CA
    You state all 800 and 1000 series add "clear" yet the "clear" is an option so I don't see why a machine with the "clear" option would automatically add it to every job. I've been running an 800 series for over 2-years and have yet to replace the clear toner.
     

  10. Seenivasagam

    Seenivasagam Member

    Joined:
    Aug 2015
    Messages:
    5
    Location:
    Sivakasi
    hi friends

    if you want to disable clear toner you have to go into Xerox Diagnostic mode and have to make some adjustment in service entry. Still you need clarification i will post it deeply
     
Loading...