Xerox DC250 printing great, but random water-like marks, showing on print.

Discussion in 'Xerox Color Laser Printers & Color Copiers' started by RustyWood, Nov 19, 2014.

  1. RustyWood

    RustyWood Member

    Joined:
    Nov 2014
    Messages:
    19
    Location:
    London
    Hi,

    I have a DC250 and I'm printing mainly SRA3 colotech+ using 250gsm 300gsm paper.

    I'm having a problem with random marks showing on the print which could only be describe as looking like a dark purple-grey water marks. The problem came then stopped for about 2000 sheets now it's back again.

    I have recently replaced all the drums and the fuser has about 45,000 on it.

    The actual print is perfect but these random marks are making it unusable.

    Has anyone had a similar problem?

    I'll try and add some pictures.

    Thanks for any advice in advance.

    Rusty

    Test A - B - C - printing Blank pages - I tested 3 sheets at a time these were the worse of the 9 sheets all together. The others had little to no marks.

    https://www.dropbox.com/s/3j86yh1hxkvz3oo/DC-250-Watermark-01-s.jpg?dl=0

    https://www.dropbox.com/s/9pfctky48fd8xhf/DC-250-Watermark-02-s.jpg?dl=0

    https://www.dropbox.com/s/l7nqst7n1bk9rg6/DC-250-Watermark-03-s.jpg?dl=0
     
  2. InterfaceP

    InterfaceP Senior Member

    Joined:
    Sep 2013
    Messages:
    189
    Location:
    Dallas, TX
    Looks like a "Cloud Defect" The eyeball test says the IBT Belt is not cleaning as it should.

    Did you attempt to clean the IBT Belt? (Not suggested)

    Try replacing the IBT cleaning blade, it's a fairly inexpensive solution.
     
  3. RustyWood

    RustyWood Member

    Joined:
    Nov 2014
    Messages:
    19
    Location:
    London
    Thanks for the help.

    No never cleaned the IBT belt. Opened it up yesterday for the first time to have a look up underneath the ROS but all looks pretty clean.

    We don't use it much during the year only during october through to december. It has a total of 329653 on the clock.

    I'll have a look in the manual is replacing the IBT cleaning blade a tricky job? I saw a video about changing the belt itself.

    Again thanks for the advice.
     
    Last edited: Nov 21, 2014

  4. RustyWood

    RustyWood Member

    Joined:
    Nov 2014
    Messages:
    19
    Location:
    London
    Thanks .. Yes perfect, cleaned out IBT cleaning blade unit as it was really clogged up with toner.. all fine now!

    Appreciate the expert advice.

    Cheers
     
Loading...