2 Color Offset Press 4+ Color Offset Press Direct Imaging Printing Press Digital Printing Press Color Copiers and Color Laser Printers Finishing Equipment Inkjet and Art Printers
2-Color Offset 4+ Color Offset Direct Imaging Digital Press Color Copiers Finishing Inkjet & Fine Art

Welcome to the Color Printing Forum


a forum for Offset Press and Digital Printing information


Please Login at the top right or Register. The Color Printing Forum is a forum to discuss offset press printing, direct imaging offset presses, digital production presses, short-run digital printing, fine art inkjet or giclee printing, and finishing equipment. Topics range from selection of new printers, printing press, and finishing equipment to adjustment, troubleshooting, optimization, and maintenance of existing printers and presses to media and finishing.


New members are encouraged to Please Register Now - it's free!
All printing equipment discussion, questions, tips and tricks are welcome. And we would like to thank experienced pressmen in advance for taking the time to share your printing experience with the Color Printing Forum community. Register »


+ Reply to Thread
Results 1 to 7 of 7
  1. #1
    Join Date
    Jul 2012
    Location
    newark, new jersey usa
    Posts
    1

    xerox 700 digital color press..please help - error code 42-326

    how do u get rid of error code 42-326 on the xerox 700 digital color press?

  2. #2
    Join Date
    Nov 2012
    Location
    New ork
    Posts
    2

    I believe that is the transfer belt silver patch is not being detected by the edge sensor, the patch and all rollers will need to be cleaned and the patch inspected for any damage or missing patch, then will need to do belt edge training to resolve the problem.

  3. #3
    Join Date
    Nov 2013
    Location
    Duluth, MN USA
    Posts
    2

    Ok, so you get that error fix - but you have rebooted the machine too many times. Now it is locked in the copy only mode. What is the code to reset the block?

  4. #4
    Join Date
    Nov 2013
    Location
    Duluth, MN USA
    Posts
    2

    Try this:
    From your message you sound like someone who is trained in servicing this machine and you probably well know that using this procedure is at your own risk:
    Hold down 0 (zero) for 5 seconds and press start (green) button
    Enter 6789, confirm
    Press log in/log out button or the key button
    Press systems settings, common settings, maintenance, NVM read/ write
    Enter nvm 741-105 and change it to 0 (zero)
    I have also seen advice to, after cleaning or replacing the transfer belt, to check the belt hole sensor for paper dust or other contamination.

  5. #5
    Join Date
    Jan 2017
    Location
    Ghana
    Posts
    2

    xerox 700 code 042-326

    how do I enter the diagnotic mode on xerox 700 press

  6. #6
    Join Date
    Jan 2017
    Location
    Ghana
    Posts
    2

    I have cleaned the IT belt but code is still there and therefore want to clear it and I don't know how to enter the diagnostic mode

  7.    Sponsored Links





  8. #7
    Join Date
    Oct 2016
    Location
    Poland
    Posts
    8

    press 0 wait 5 second and click start button (green). now type 6789 and confirm.

Similar Threads

  1. Xerox 700 (i) Color Calibration - From the Glass for copies
    By allegracorona in forum Xerox Digital Presses
    Replies: 3
    Last Post: 02-16-2015, 11:56 AM
  2. color code strip/bar for Roland 700 (704)
    By ashvak in forum Man Roland Printing Presses
    Replies: 5
    Last Post: 08-09-2012, 10:45 AM
  3. Xerox 700 Digital Color Press for sale
    By terrymcv in forum Offset & Digital Presses for sale
    Replies: 0
    Last Post: 10-14-2011, 11:39 AM
  4. Igen3 digital press issues (Print Engine Fault code XPE-09-3503)
    By Meesh48 in forum Xerox iGen3 & iGen4 Digital Presses
    Replies: 1
    Last Post: 07-01-2011, 11:25 AM
  5. Need Operating and Functions Control Manual for Xerox iGen3 Digital Color Press
    By renesony in forum Xerox iGen3 & iGen4 Digital Presses
    Replies: 1
    Last Post: 12-11-2008, 01:08 PM