Xeikon 5000 quality issue

Discussion in 'Xeikon Digital Presses' started by Cbuck, May 6, 2013.

  1. Cbuck

    Cbuck New Member

    Joined:
    May 2013
    Messages:
    1
    Location:
    Jacksonville, Florida
    If I have a solid going across the landscape direction of the paper one end is more solid than the other end.
    Any suggestions?
     
  2. sbf laurie

    sbf laurie New Member

    Joined:
    Apr 2013
    Messages:
    2
    Location:
    SOUTHAMPTON ENGLAND
    hi, basics first, check the condition of the paper, and make sure its a good make. check your dev heights are all correct in the corresponding colours you are using. try printing the solid on the y side this will tell if the above is true. it also could be toner refresh rate. do a toner dump before you start. if the centre of the web produces a better solid rotate the job and bite the bullet on the paper wastage. i hope this helps.
     
Loading...