|2-Color Offset||4+ Color Offset||Direct Imaging||Digital Press||Color Copiers||Finishing||Inkjet & Fine Art|
Welcome to the Color Printing Forum
a forum for Offset Press and Digital Printing information
Please Login at the top right or Register. The Color Printing Forum is a forum to discuss offset press printing, direct imaging offset presses, digital production presses, short-run digital printing, fine art inkjet or giclee printing, and finishing equipment. Topics range from selection of new printers, printing press, and finishing equipment to adjustment, troubleshooting, optimization, and maintenance of existing printers and presses to media and finishing.
New members are encouraged to Please Register Now - it's free!
All printing equipment discussion, questions, tips and tricks are welcome. And we would like to thank experienced pressmen in advance for taking the time to share your printing experience with the Color Printing Forum community. Register »
Our Harris m-300 recently had the main drive motor replaced and sense then we've had major slurring issues. Some times it's all the units most time's it's either the black or Yellow. We replaced the infeed harmonic which seemed to help for half a shift but now it's slurring again. Our maintenance staff is convinced the slur is caused by the infeed because the temp fix the harmonic made but I'm not so sure. Any idea's to help pin point our problem would be great.
There is a bounce threw the hole press you can see the color dots really moving around on the CCR monitor, our (gmi) auto color system isn't picking up the color bars correctly also having issues with our compensation holding steady.