Failure of the UV system in the machine Heidelberg Speedmaster CD102 6 + L

Discussion in 'UV' started by bizon83pl, Jul 19, 2014.

  1. bizon83pl

    bizon83pl Member

    Joined:
    Nov 2012
    Messages:
    12
    Location:
    Poland
    hello. I have a problem with the UV lamps on the machine. whether anyone had this problem and knows what he is due? image.jpg
     
  2. Meny

    Meny Senior Member

    Joined:
    Apr 2008
    Messages:
    773
    Location:
    Israel
    Check the following:
    Hot air removal working OK
    water level in the closed coolling system
    IS the eater tank being cooled OK ? (fans ? Radiator clean?)

    If all the above is right , you should not have an overheat issue , so this is your direction
     
  3. bizon83pl

    bizon83pl Member

    Joined:
    Nov 2012
    Messages:
    12
    Location:
    Poland
    Thanks Meny. Someone tell me how to check the hot air if it works ok?
     
  4. Meny

    Meny Senior Member

    Joined:
    Apr 2008
    Messages:
    773
    Location:
    Israel
    Are the extraction fans working ? taking out hot air ?
     
  5. bizon83pl

    bizon83pl Member

    Joined:
    Nov 2012
    Messages:
    12
    Location:
    Poland
    Oh... now I understand :) I have to check :) We have this machine second month just getting her learn :) thx
     
  6. Meny

    Meny Senior Member

    Joined:
    Apr 2008
    Messages:
    773
    Location:
    Israel
    send me photos of the press all around and i will point to you what to check and where. Menybor@yahoo.com


    On a new installation is is reasonable that a pipe will be disconected or an air hose not conected or twisted - easy to solve , but until you do you will have no cooling fluid or no air transfer to cool the units...

    This is why it is best to call the engineer who installed , with the hope that he knows the UV system....
     
  7. bizon83pl

    bizon83pl Member

    Joined:
    Nov 2012
    Messages:
    12
    Location:
    Poland
    Do hot air -ok
    Radiator - ok
    Water - ok (2 bar)
    Temperature 30
    Pomp water- ok ( 5,5-6 bar )
    but I see that there is no water pressure in the lamps why? :(
     

  8. bizon83pl

    bizon83pl Member

    Joined:
    Nov 2012
    Messages:
    12
    Location:
    Poland
    problem solved.
    excessive pressure on the radiator.
    reason was clogged filter...
     
Loading...