E-0 error code on Ryobi 9995

Discussion in 'Ryobi Printing Presses' started by Cumminsjamese, Apr 22, 2015.

  1. Cumminsjamese

    Cumminsjamese New Member

    Joined:
    Apr 2015
    Messages:
    1
    Location:
    Norcross, GA, United States
    Machine ran fnle yesterday. Walked in the shop this morning and it wouldn't turn on. Got error code E-0. Tried several times to start...sometimes acted like it was going to, but didn't. Never experience this before. Any ideas on what cause is?
     
  2. mr.mark

    mr.mark Senior Member

    Joined:
    Jun 2015
    Messages:
    55
    Location:
    ohio
    Is it always the same code or when you power off and on will the code change?
     
  3. brianabbot

    brianabbot New Member

    Joined:
    May 2016
    Messages:
    2
    Location:
    uk
    Hi, I have exactly the same problem on our press, did you manage to get yours sorted out?

    Thanks
    Brian
     
  4. spikeboy

    spikeboy Senior Member

    Joined:
    Sep 2014
    Messages:
    62
    Location:
    new york
    you may have a short in the electrical plug try to switch see if it helps/
     
  5. pmc8899

    pmc8899 Member

    Joined:
    Apr 2013
    Messages:
    8
    Location:
    United States
    Make sure your levers are in the right position before power up.
     
  6. brianabbot

    brianabbot New Member

    Joined:
    May 2016
    Messages:
    2
    Location:
    uk
    Hi its sorted, thanks for the advice with the plug, it turned out to be ok, the problem was the microswitch on the round cover that you open to put the handle in to hand turn the press.

    Thanks for the help

    Brian
     
  7. kamlesh suthar

    kamlesh suthar New Member

    Joined:
    Sep 2021
    Messages:
    1
    Location:
    Himatnagar Gujarat India
    Hi, I have exactly the same problem on our press, did you manage to get yours sorted out?

    Thanks
    Kamlesh Suthar
     

  8. Jack liston

    Jack liston Senior Member

    Joined:
    Sep 2019
    Messages:
    265
    Location:
    Connecticut
    The main power switch may be problem I think you can move black wire in switch to pole on left
     
Loading...