2 Color Offset Press 4+ Color Offset Press Direct Imaging Printing Press Digital Printing Press Color Copiers and Color Laser Printers Finishing Equipment Inkjet and Art Printers
2-Color Offset 4+ Color Offset Direct Imaging Digital Press Color Copiers Finishing Inkjet & Fine Art

Welcome to the Color Printing Forum


a forum for Offset Press and Digital Printing information


Please Login at the top right or Register. The Color Printing Forum is a forum to discuss offset press printing, direct imaging offset presses, digital production presses, short-run digital printing, fine art inkjet or giclee printing, and finishing equipment. Topics range from selection of new printers, printing press, and finishing equipment to adjustment, troubleshooting, optimization, and maintenance of existing printers and presses to media and finishing.


New members are encouraged to Please Register Now - it's free!
All printing equipment discussion, questions, tips and tricks are welcome. And we would like to thank experienced pressmen in advance for taking the time to share your printing experience with the Color Printing Forum community. Register »


+ Reply to Thread
Results 1 to 6 of 6
  1. #1
    Join Date
    Apr 2010
    Location
    San Diego, Ca.
    Posts
    1

    Ricoh Aficio 2060 relpace cleaning web error sc550

    We recently purchased a Ricoh Aficio 2060 copier. The problem is the error message of "replace cleaning web". My ? is can you reset the counter before the web kit is replaced or is there a chip on the part that activates or will not let you set the counter to 0.? I have done the service 1902 reset to 0 or 1 & the error remains even after a power off/on. Also is the 2060 of a family of copiers that the drivers & software is the same, such as 2050, 2040 etc. ? We would like to use it while we wait for the parts to arrive .

  2. #2
    Join Date
    May 2010
    Location
    Sicily
    Posts
    2

    Hy

    You can reset the Web counter in Service mode 1902, it shows the consumption in %, when you change the Cleaning web you should reset these setting to 0. If the SC 550 error is still there you can check the sensor on the cleaning web frame, (it looks like a black finger)... you can try this: set the counter to 60 or 70, turn off and then ON the machine, then back in Service mode and set the counter to 0. Let me know!

  3. #3
    Join Date
    May 2011
    Location
    usa
    Posts
    1

    Before resetting the code you must change the unit, otherwise fusing roller may damage. Ricoh error list is available here
    Richoh Errors

  4. #4
    Join Date
    Feb 2009
    Location
    south wales uk
    Posts
    378

    why not just replace the web???
    youll have to sooner or later cause the machine will just stop

  5. #5
    Join Date
    May 2010
    Location
    Sicily
    Posts
    2

    Quote Originally Posted by plotter View Post
    why not just replace the web???
    youll have to sooner or later cause the machine will just stop
    ...of course the first thing to do is replace the web if necessary, ahaha. But sometimes these machines do SC 550 when there is still enough cleaning web (60-70%)

  6.    Sponsored Links





  7. #6
    Join Date
    Nov 2011
    Location
    saudi arabia
    Posts
    5

    if happen you had already replace the web(NEW) and reset sp 1902 into 0 or 1(value 0 to 96) and still SC 550. replace the BCU it happen to me before.... Good Luck....

Similar Threads

  1. Ricoh Aficio 1224c - only prints on left side leaving right side blank
    By stiffordclays in forum Ricoh Color Laser Printers & Color Copiers
    Replies: 2
    Last Post: 06-17-2012, 05:58 PM
  2. FOR SALE Xerox 2060
    By Robert in forum Color Laser Printers & Copiers for sale
    Replies: 6
    Last Post: 06-04-2010, 04:54 AM
  3. Ricoh aficio mp2000ln color machine
    By cpf32sys in forum Ricoh Color Laser Printers & Color Copiers
    Replies: 0
    Last Post: 04-13-2010, 11:06 AM
  4. cleaning vector/freedom processor
    By Albuq. Henry in forum Platemaking
    Replies: 0
    Last Post: 09-29-2009, 05:08 PM
  5. Help with Print software.. ricoh aficio w2400
    By cadmaster in forum Layout, graphics, and prepress Software
    Replies: 0
    Last Post: 12-22-2008, 09:21 AM