Recent Activity

Sunilvaryani replied to the thread Heidelberg PM52-2 Perfecting Error.

Hi I’m having the same problem with the pm 52 Machine It’s giving error p 21 not going all sensors Working well showing on the zak...

Jack liston replied to the thread Heidelberg CX 102 COLOR AQ LED.

at uv ink is a pain in the *** had similar issues on CD 74 try to give the water distribution one full turn plus

CHOCK replied to the thread Duplo error code.

Hi sir: Look for any battery in the MOBO boards , and see if the voltage is ok, or ribbon cable or flat cable in the system where is...

CHOCK replied to the thread Heidelberg Suprasetter A52 - Error 5701.

Hi Sir: Please do the follow steps: 1) Perform a visual inspection : look for loose and broken wires, improperly seated connectors,...

Jack liston replied to the thread Heidelberg CX 102 COLOR AQ LED.

Hello Jim do you think you can run as dry solid turn off water see if it looks better

jim hanson posted a new thread.

Heidelberg CX 102 COLOR AQ LED

i am trying to run a 25x38 solid in 432 grey on 12pt c1s...i cant get rid of the roller streaks no matter what i do..in the old days i...

Forum: Heidelberg Printing Presses

omar jimenez replied to the thread Duplo error code.

hi¡¡ help me please , i need reprogram board for system 2000 collator, please tell me

omar jimenez replied to the thread Duplo error code.

how reprogram the board for system 2000 collator?

omar jimenez replied to the thread Duplo error code.

hello, i need reprogram board of a system 2000 collator, it shows "data is not found" please help me

CHOCK replied to the thread 2011 ElTosch Dryer.

All printed circuit electronic boards. OK? Blessings.

johnq04 replied to the thread 2011 ElTosch Dryer.

Thank you for the response. Please describe the location of the PC Boards to examine the edge connectors. Our pressman could not locate.

CHOCK replied to the thread 2011 ElTosch Dryer.

Hi Sir: Please review this: 1) Perform a visual inspection : look for loose and broken wires, improperly seated connectors, loose or...

johnq04 posted a new thread.

2011 ElTosch Dryer

Anyone familiar with the following error on the ElTosch Dryer for a 2011 ManRoland 504? [ATTACH] [ATTACH]

Forum: Man Roland Printing Presses

printer55 posted a new thread.

Heidelberg Suprasetter A52 - Error 5701

Hello guys, We have the error 5701 on our Suprasetter A52. We checked and cleaned the belt and mesured the tension - all seem fine....

Forum: Platemaking

Adil replied to the thread INK Fountain Liner Problem.

when there is wear in this part this directly means that there is friction between the inkwell segments and the plate then the zeroing...